Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 296 / 512

CHAPTER 1 SCREEN OPERATIONS
5. Diagnosis Screens
I
– 281
5.7 Condition Setting screen (V Anlyz condition screen)
The various conditions such as sampling data and trigger data are set on this screen.
V Anlyz condition
12:34
RDY:MEM :
Area
change
To
V-Anlyz
Data
type
Clear
10000
X/Position command
0
0
Data
V-scale/div
Base line
Offset
0 Samp valid
X/Position command
10000
0
0
0
Ch1
Ch2
Stop level
Stop trigger
Sample rate
H-scale
AUTO
Nothing
0
Monitor Setup Edit Diagnos Mainte
ms
ms/div
ms
Delay time 0
Data
V-scale/div
Base line
Offset
Samp valid
7.1
(1) Display items
Display item Details
1. Channel 1
setting area
2. Channel 2
setting area
The various data for channel 1 and channel 2 are set.
"Data" can be selected from the menu. For the conditions other than
"Data", select the item with the cursor, and input the value.
When the Next Page key is pressed, the setting area will change from
Channel 1 and 2 to Channel 3 and 4. The data for up to ten channels
can be set.
Data
: Set the type of data to be sampled and the axis name.
Vert scale/div : This is the vertical axis scale. Set how many sample
data items corresponds to one scale.
(Setting range: 0 to 10000000)
Base line : Designate at which the scale the vertical axis' zero is
positioned. (Setting range:
−
8 to 8)
Offset : Set the value to be added as the offset value to the
sample data. (Setting range:
−
10000000 to 10000000)
Samp valid : Set whether channel sampling is valid or not.
(0: Invalid, 1: Valid)
1. Channel 1
setting area
2. Channel 2
setting area
3. Common
setting area
Downloaded from ManualsNet.com search engine