CHAPTER 1 SCREEN OPERATIONS
5. Diagnosis Screens
I
– 293
5.8.1 Setting the channel of the waveform to be displayed
1)
The cursor will appear at the display mode field.
2)
"1/3/9" will appear at the cursor position.
The channels in the sampling data display field will
change to the 1, 3 and 9 channels.
The channel 1, 3 and 9 data will be sampled.
5.8.2 Carrying out continuous sampling
When the menu key Continu samplng is pressed, the sampling will start and the waveform will be
displayed continuously. When the menu key is pressed again, the menu highlight will return to normal,
and the sampling will stop.
(1) Carrying out continuous sampling
1)
The V Anlyz condition screen will open.
After setting the conditions or data, press the menu
key To
V-Anlyz to display the Visual analyzer
screen.
2)
3)
The sampling and waveform display will start.
Press the menu key
Display mode .
Input a value.
1/3/9 INPUT
Press the menu key
To cond set to display the
V Anlyz condition screen.
Then, set the conditions and
data.
Press the menu key
Display mode , and set the
channel of the waveform to
be displayed.
Press the menu key
Continu samplng .
Refer to section "5.7.1
Setting the condition data" for
details.
Refer to "5.8.1 Setting the
channel of the waveform to
be displayed" for details.
Downloaded from
Содержание MELDAS 600M Series
