Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 95 / 512

CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
I
– 80
(4) Checking one block at a time ( Check step )
1)
2)
Only one block of the program is checked, and the path
for that block is displayed. The menu is highlighted
during the check.
When one block of checking is completed, a message
appears, and the menu highlight returns to normal.
Check stopped
3)
The program is checked block by block.
When the check is completed, a message appears,
and the check mode is canceled.
The menu highlight returns to normal.
Program chec k c om pleted
(Note 1)
If
Check continu
is pressed midway, the program is checked continuously to the
end of the program.
(Note 2)
The workpiece coordinate position counter and G command modal (Group 03, 01,
07, 09) are displayed during the check step.
(5) Canceling the program check ( Check reset )
1)
The check mode is canceled, and the menu highlight
returns to normal. The message such as "Checking"
disappears.
Search the program with the
same procedure as method
(3).
Press the menu key
Check step
.
Press
Check step
repeatedly.
Press the menu key
Check reset
.
State during one block check
State when one block check is completed
Downloaded from ManualsNet.com search engine