CHAPTER 4 APPENDICES
Appendix 2. Operation Messages
IV
– 18
2.14 Messages related to anshin-net
(1) Messages related to all Anshin-net screens
Message
Display in message field
Details
(None)
Press Call to call the NC service.
Do not turn the power OFF during
the one-touch call.
•
Communication has not been
started.
•
A call is being placed with
automatic alarm notification or
one-touch call, and a call is being
received from the NC service.
(2) Messages related to automatic alarm notification
Message
Display in message field
Details
Dialing
Do not turn the power OFF until the
automatic alarm notification ends.
•
A call is being placed with the
automatic alarm notification.
•
Communication starts when an
alarm occurs, but the line is not
connected yet in this state.
•
This state is also entered when
standing by for transmission.
Connecting
Do not turn the power OFF until the
automatic alarm notification ends.
•
The line is connected with
automatic alarm notification.
Sending
Do not turn the power OFF until the
automatic alarm notification ends.
•
The diagnosis data is being sent
with automatic alarm notification.
•
Communication has been started
with emergency stop by the servo,
spindle or PLC alarm, or by the
establishment of the conditions
set in the parameters.
(None)
Press Call to call the NC service.
Do not turn the power OFF during
the one-touch call.
•
Automatic alarm notification has
ended, and the line has been
disconnected.
Waiting for dialing
Do not turn the power OFF until the
automatic alarm notification ends.
•
Redialing since the NC service is
using the line for other
communication.
(Status of
communication with
NC service)
Connecting with NC service.
Wait for communication to end.
•
In connection standby state since
line is being used by anshin-net.
(Status of
communication with
machine
manufacturer)
Connecting with machine
manufacturer.
Wait for communication to end.
•
In connection standby state since
line is being used by machine
network.
Downloaded from
Содержание MELDAS 600M Series
