Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 127 / 512

CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 112
Menu Details Type Reference
Line
clear
This erases a designated line (multiple lines possible)
of offset data.
Designation method:
Offset No. where erasing begins/ Offset No. where
erasing finishes
(Ex.)
1/E : All offset data is set to "0".
When the
INPUT
key is pressed without designating
a line, only the line where the cursor is currently at is
erased.
A
3.1.2 Erasing the
tool offset data
Line
copy
This copies the contents of the designated line (one
line amount) of tool offset data.
C
Line
paste
This writes, in the line where the cursor is at, the
contents (one line amount) of the copied tool offset
data.
If the copied line of data is changed after the menu key
Line copy
is pressed, original data is written when
pasted.
Once copied, a line of data can be pasted any number
of times until a new area is copied.
C
3.1.3
Copying/pasting
the tool offset
data (1)
Copy
This copies one data item at the cursor position.
The copied data item is highlighted, and returns to
normal when pasted.
C
Paste
This pastes the copied data item at the cursor position.
Once copied, an item of data can be pasted any
number of times until a new data item is copied.
C
3.1.3
Copying/pasting
the tool offset
data (2)
Downloaded from ManualsNet.com search engine