CHAPTER 2 MACHINE OPERATIONS
6. Operation Switch Functions and Other Functions
II
– 34
(3) Operation when automatic operation commands and manual/automatic simultaneous valid
selection are issued for same axis
(a) If a movement command with automatic operation is issued to a manual/automatic
simultaneous valid axis, the operation warning "OPW0105 Internal interlock axis exists" will
occur. Automatic operation will stop in the interlock state until the "manual/automatic
simultaneous valid" signal turns OFF. The manual/automatic simultaneous valid axis can be
controlled in the manual operation mode during this time.
G91 G00 X100. Y100. ;
G91 G00 Z100. ;
Program operation mode (Y708)
(memory mode)
Automatic operation start (Y710)
Automatic operation block progress
Jog mode (Y700)
Manual/automatic simultaneous
valid Z axis (Y522)
Feed axis sel Z axis (Y4E2)
Axis moving Z axis (X3A2)
Movement with jog feed
Movement with
automatic operation
"OPW0105 Internal interlock axis exists"
(b) If the "manual/automatic simultaneous valid" signal is turned ON for an axis moving with
automatic operation, the operation warning "OPW0105 Internal interlock axis exists" will occur,
and the operation will decelerate to a stop immediately. Automatic operation will stop in the
interlock state until the "manual/automatic simultaneous valid" signal turns OFF. The manual/
automatic simultaneous valid axis can be controlled in the manual operation mode during this
time.
Note that the interlock will be applied even during a tap modal.
Interlock will also be applied during synchronous tap cutting, and the spindle will also be
synchronized to the manual drilling axis.
Downloaded from
Содержание MELDAS 600M Series
