CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 187
3.7 Workpiece Measurement screen
The surface, width center, and hole center workpiece offsets are measured in this screen, and the offset
data is set based on those measured values.
(1) Display
items
Display item
Details
1. Measurement
counter
This displays the values during measurement.
This counter becomes blank when setting coordinate system offset data, or
when the NC is reset.
The display format differs depending on the surface, hole or width
measurement type.
Surface
measurement
counter
Machine position when the skip signal is read + Skip flow rate
(Note)
+ Center
compensation Sensor radius
(Note)
The skip flow rate changes b/
−
with the movement direction.
Hole
measurement
counter
Machine position when the skip signal is read + Skip flow rate
(Note)
+ Center
compensation amount
(Note)
The skip flow rate changes b/
−
with the movement direction.
Width
measurement
counter
Machine position when the skip signal is read + Skip flow rate
(Note)
+ Center
compensation amount
(Note)
The skip flow rate changes b/
−
with the movement direction.
2. Measurement
position
counter
Machine po Sensor radius
(Note)
+ Skip flow rate + Center
compensa-tion amount
(Note)
The sensor radius changes b/
−
with the movement direction.
3. Sensor length
and diameter
Sensor length
: This displays the length to the tip of the touch sensor.
Sensor diameter : This displays the diameter of the ball at the tip of the touch
sensor.
4. Manual
numeric value
setting
This displays each command value of M (miscellaneous function command
value) and T (tool command value).
5. Guide drawing
This plots the measurement location to match each measurement.
"On meas" at the upper right of the drawing appears while the TLM switch is
ON.
4. Manual numeric
value setting
1. Measurement
counter
5. Guide drawing
2. Measurement
position counter
3. Sensor length
and diameter
Downloaded from
Содержание MELDAS 600M Series
