Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 37 / 512

CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
I
– 22
(Example 2) To select a program file to be transferred from the memory to a FLD on the
Input/Output screen
Select the memory program file as the transfer origin.
1)
The Input/Output screen appears.
The following menu appears.
Area
change
Device
select
Dir File
name
List
update
Trnsfr
A ->B
• • •
2)
The A display area is validated.
3)
The cursor appears at "A: Device".
The following menu appears.
Memory RS232C HD IC card Ethernet FLD
4)
The selected device name appears.
When memory is selected, "Program" appears in the
directory as a default.
5)
The mode for inputting the directory name is entered.
(The cursor appears at "Directory:".)
The following menu appears. When selecting a device
other than the memory, refer to the procedures for
selecting the transfer destination FLD file.
Program Tool
offset
Variabl Tool
life
User
param
Machine
param
System
param
6)
The set directory path appears on the screen.
The following two methods can be used to set the directory path.
• Set the directory path (full path) in the data setting area, and press the
INPUT
key.
• Press the menu key
From list
, move the cursor to the target directory, and press the
INPUT
key.
Select the Input/Output screen.
Press Area change , and
validate the A: (transfer origin)
display area.
Press the menu
Device select .
Press the menu Memory .
Select the menu Dir .
Select the directory path
(program) from the menu.
A : Device :
Memory
Directory : Program
File :
A : Device :
Memory
Directory : Program
File :
Downloaded from ManualsNet.com search engine