CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
I
– 19
Device menu's submenus
Menu Details
Type
Reference
Memory
This selects the memory.
C
−
RS232C
This selects RS-232C (including tape).
C
−
HD
This selects the hard disk.
(Note)
This menu is indicated as Data server for the
MELDAS610M, 630M and 650M.
C
−
IC card
This selects the IC card.
(Note)
Use a recommended IC card that matches the
Mitsubishi quality standards.
(Refer to section "3.3 Data Input/Output screen"
for the recommended products.)
C
−
Ethrnet
This selects Ethernet.
C
−
FLD
This selects the floppy disk.
C
−
(Note 1)
The devices that can be used differ according to the operations and to the provision of
options.
(Note 2)
If the
key is pressed when selecting the file name, the file name at the data setting
area is erased. The file already selected on the screen may or may not be erased,
depending on the screen.
(Note 3)
When designating the directory or file name, the designated is not fixed when the
directory name or file name is just displayed at the data setting area. Confirm that these
items are displayed at the data setting area, and then press the
INPUT
key.
(Note 4)
If a file other than a machining program is selected when Device memory is set, the file
name cannot be designated. (The file name is fixed.)
(Note 5)
Depending on the screen, the
List update and From list
menus may not be provided. In
this case, input the directory path and file name from the data setting area.
Downloaded from
Содержание MELDAS 600M Series
