CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 162
Number
Name
Details
Setting range (units)
37 0015 Meas ext
menu invld
∗
This invalidates the extended menu (Coordi EXT,
SkipPos take in) on the Workpiece Measurement and
Rotation Measurement screens.
Extended menu
0: Display
1: Do not display
37 0020 Sys1 draw
plane ax1
37 0021 Sys1 draw
plane ax2
37 0022 Sys1 draw
plane ax3
This sets the control axis address when drawing
System 1.
Axis name
37 0023 Sys2 draw
plane ax1
37 0024 Sys2 draw
plane ax2
37 0025 Sys2 draw
plane ax3
This sets the control axis address when drawing
System 2.
Axis name
37 0030 Length
measure
speed
This sets the
feedrate during
automatic tool
length
measurement.
1 to 60000 (mm/min)
37 0031 L meas slow
area r
This sets the
distance from
the
measurement
point to the
deceleration
start point.
0 to 999999.999 (mm)
37 0032 L meas slow
area d
[Automatic tool length
measurement]
Start point
Deceleration
start point
Measurement
speed
measurement
point
r
d
d
This sets the
area of the point
where the tool
should stop.
0 to 999999.999 (mm)
37 0040 Program
save type
This selects the method for saving the program in the
Edit screen.
0: Save program being edited with Save file menu.
1: Save program being edited each time the
INPUT key is pressed.
0,1
37 0041 STN contrast This adjusts the contrast of STN display.
0 to 15
37 0042 Space mode
in Editor
This selects the method of displaying the program on
the Edit screen.
0: Display the texts as that was input.
1: Display with inserting a space between each
word.
0,1
37 0043 Invalid gray
menu
∗
This shows or hides the menus that cannot be
operated.
0: Display as gray menus.
1: Do not display.
0,1
37 0044 Work center
pos H
37 0045 Work center
pos V
Set the workpiece rotation center position on the
machine coordinate system for each axis, using the
table angle as 0 degrees. (Valid only during manual
operation.)
–999999.999 to
999999.999 (mm)
37 0046 List
comment
type
The list comments are changed when HD, FLD or IC
card is selected as the Device on the Input/Output
screen, etc.
0: The date and time are displayed as the comment.
1: The file comment is displayed.
0,1
Downloaded from
Содержание MELDAS 600M Series
