CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 128
Dir (other than memory) and File name menu submenus
Menu Details
Type
Reference
From
list
The cursor appears in the list display. The list contents
can be selected with the
INPUT
key.
When a directory is selected, the contents of the
selected directory are displayed in the list. Continued
selection is possible.
When a file name is selected, the file name is
temporarily displayed in the data setting area. When
the
INPUT
key is pressed again, it is fixed.
A
Outline of device, directory, and file name setting methods
Designation method
Device
Designation target file
Device Directory File
name
NC
memory
• Machining program
• User macro
• Fixed cycle program
Select from
the submenu
–
(Default)
Key input in the
data setting area,
and press
INPUT
Select from the list
File other than the
machining program
Select from
the submenu
Select from the
submenu
–
(Fixed)
Key input in the
data setting area,
and press
INPUT
Key input in the
data setting area,
and press
INPUT
Device
other than
the NC
memory
All files
Select from
the submenu
Select from the list Select from the list
The device can be selected from the submenu. (The devices that can be used will differ depending
on the specifications.)
One of the following methods can be used to designate the directory (for devices other than the NC
memory) and file name.
• Set the directory path (full path) or file name in the data setting area, and press the
INPUT
key.
•
Press submenu
Dir
of the menu
File name
or
From list
. Move the cursor to the target
directory or file name, and press the
INPUT
key.
A wild card (
) can be used when selecting a file name.
Notes when selecting a file
(Note 1)
During directory and file name setting, the designated directory, path or file name will be
set, even if it does not actually exist. This will not cause an error. Note that the previously
set directory is overwritten.
(Note 2)
When a file in the NC memory other than a machining program is designated, it is not
necessary to set the file name. (The file name is fixed.)
(Note 3)
When a file name is selected from the menu, it first is displayed in the data setting area.
However, at this time the file name has not yet been fixed. Press the
INPUT
key again to
fix the file name.
(Note 4)
When the
key is pressed when setting a file name, the file name in the data setting
area is erased.
(Note 5)
When a Fixed cycle program is designated, the basic common parameters 110007
"Fix_P" must be set. Select "Memory" for the device, and "Program" for the directory.
Downloaded from
Содержание MELDAS 600M Series
