CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 179
3.6.2 Displaying in group units (Tool life (grp) screen)
The tool life management data of a random group is set and displayed. If the registered tools cannot be
displayed on one screen, scroll the screen using the
or
key.
(1) Display
items
Display item
Details
Setting range
Group No.
This is the number of the tool on which the tool life management
is being carried out.
These numbers are only displayed when displaying by group
units.
1 to 99999999
Tool No.
This is the number corresponding to each tool. Depending on
the specification configuration, up to 1000 tools can be
registered.
1 to 99999999
ST
Tool status
Machine manufacturer release
Tool status
0 : Unused tool
Normally set to "0" when the tool is replaced with a new
tool.
1 : Used tool
This becomes "1" when the cutting actually starts.
2 : Normal life tool
This becomes "2" when the usage data (usage time and
number of uses) exceeds the life data.
3 : Tool abnormality 1 tool
4 : Tool abnormality 2 tool
(Note)
Item 3 and 4 differ depending on the machine
manufacturer specifications.
Downloaded from
Содержание MELDAS 600M Series
