CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
I
– 3
Key
type
Key
Operation
10. Cursor
key
↑
↓
This moves the cursor up or down one when setting data in
the screen display items.
←
→
This moves the cursor one item to the left or right when
selecting data in the screen display items.
←
at cursor left end : Moves to the right end of previous
line.
→
at cursor right end: Moves to left end of next line.
←
→
This moves the data input cursor one character to the left or
right in the data setting area.
11. INPUT
key
INPUT
This fixes the data in the data setting area, and writes it to
the internal data. The cursor moves to the next position.
12. RESET
key
RESET
This resets the NC.
13. Menu
keys
This changes the screen and displays the data.
(2) Touch
panel
When the touch panel specifications are provided, some key operations can be carried out by
directly touching the screen. In this case, the menu keys are not provided on the setting and display
unit.
The following operations can be carried out with the touch panel.
•
Selection of each menu (menu keys)
•
Changeover of menus (buttons on left and right ends of menu)
•
Selection of screen group (function keys)
Touch panel
(Note 1)
This specification can be selected with the MELDAS 615/635.
(Note 2)
There is no difference in the screen operations when the touch panel is used or the normal
keys are used.
(Note 3)
If the mouse is used when using the touch panel, correct operation may not take place.
Downloaded from
Содержание MELDAS 600M Series
