Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 131 / 512

CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 116
3.1.3 Copying/pasting the tool offset data
(1) Copying/pasting a line at the cursor position (one line amount)
1)
(Note)
One of the following methods can be used to designate the line.
• Using the cursor movement keys
↑
and
↓
, move the cursor to the line to be
selected.
• Press
Offset No.
, set the offset No. in the setting area, and press the
INPUT
key.
2)
One line of the copied data is highlighted.
100
101
103
104
105
106
102
Ofset No Length L wear Radius R wear
0.000
0.000
56.000
0.000
0.000
0.000
-12345.000
0.000
0.000
19.000
0.000
0.000
0.000
-123.000
0.000
0.000
10.000
0.000
0.000
0.000
-12345.000
0.000
0.000
8.000
0.000
0.000
0.000
-123.000
3)
4)
The copied data is written in the line where the cursor is
at. The highlight of the copied line returns to normal.
The copied data is held until another line is copied.
107
108
109
110
111
112
113
Ofset No Length L wear Radius R wear
0.000
0.000
56.000
0.000
0.000
0.000
-12345.000
0.000
0.000
19.000
0.000
0.000
0.000
-123.000
0.000
0.000
10.000
0.000
0.000
0.000
-12345.000
0.000
0.000
8.000
0.000
0.000
0.000
-123.000
(Note)
If the copied line of data is changed after the menu key
Line copy
is pressed, the
changed data is written when pasted.
Move the cursor to the line to
be copied.
Select line copy.
Menu
Line copy
Move the cursor to the line
(offset No.: 109) where the
data is to be pasted.
Press the menu key
Line paste
.
The highlight of the copied line
returns to normal.
Downloaded from ManualsNet.com search engine