CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
I
– 55
2.5.2 Executing top search
Top search is used to designate the start position in the program at a random position when executing
restart search and machining time calculation.
Always carry out top search.
(1) Operation
method
1)
The selected device name and directory path appear in
the setting column.
Directory /PROGRAM
Device HD
(Note)
The setting method is the same as operation search. Refer to "2.4.1 Executing an
operation search".
2)
The set numbers appear in the setting column.
3)
Top search starts. When top search is completed, a
message appears.
The setting column contents are cleared.
(2) Notes for top search
1) Always carry out a top search before restart search. An operation error occurs if not carried out.
2) O No. (program number) cannot be omitted.
3) If one or two , N and B Nos. are set, the numbers that are not set are ignored.
Set the program device and
directory for top search.
Set the program No., and
press the
INPUT
key.
Press the menu key
Top search
.
Set the sequence No. and block No. in N and B
respectively.
(Note)
Always set the program No.
Downloaded from
Содержание MELDAS 600M Series
