CHAPTER 4 APPENDICES
Appendix 2. Operation Messages
IV
– 19
(3) Messages related to operator notification
Message
Display in message field
Details
Operator notice
effective
If automatic operation stops while
operator notification is valid, the
designated telephone number will
be contacted.
•
Operator notification is valid.
•
If machining ends normally or
abnormally in this state,
communication with operator
notification will start.
Dialing
Do not turn the power OFF until the
operator notification ends.
•
Data is being transmitted with
operator notification.
•
Communication will start when
machining ends normally or
abnormally, but the line is not
connected yet in this state.
•
This state is also entered when
standing by for transmission.
Connecting
Do not turn the power OFF until the
operator notification ends.
•
The line is connected with
operator notification.
Sending
Do not turn the power OFF until the
operator notification ends.
•
The diagnosis data is being sent
with operator notification.
(None)
Press Call to call the NC service.
Do not turn the power OFF during
the one-touch call.
•
Communication with operator
notification has ended, and the
line has been disconnected.
Waiting for dialing
Do not turn the power OFF until the
operator notification ends.
•
Redialing since the NC service is
using the line for other
communication.
(Status of
communication with
NC service)
Connecting with NC service.
Wait for communication to end.
•
In connection standby state since
line is being used by anshin-net.
(Status of
communication with
machine
manufacturer)
Connecting with machine
manufacturer.
Wait for communication to end.
•
In connection standby state since
line is being used by machine
network.
(4) Messages related to one-touch call
Message
Display in message field
Details
Carry out one-touch
call? (Y/N)
Press "Y" to make a one-touch call,
and press "N" to cancel.
If the line is being, a connection with
NC service will be established as
soon as the line is idle.
•
A connection with NC service has
not been established.
•
The system is confirming whether
to actually make a one-touch call.
Dialing
Do not turn the power OFF until the
one-touch call is completed.
•
Data is being transmitted with
one-touch call.
•
Communication will start when "Y"
is pressed in step 1, but the line is
not connected yet in this state.
Connecting
Do not turn the power OFF until the
one-touch call is completed.
•
The line is connected with
one-touch call.
Sending
Do not turn the power OFF until the
one-touch call is completed.
•
The diagnosis data is being sent
with one-touch call.
Downloaded from
Содержание MELDAS 600M Series
