Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 250 / 512

CHAPTER 1 SCREEN OPERATIONS
4. Edit Screens
I
– 235
4.1.2 Editing a program
(1) Operation method
1)
2)
The menu is highlighted, and the cursor appears at the
No. setting column.
3)
The program is displays from the head. The cursor
moves to the head character of the program. The mode
enters the overwrite mode.
When the display is completed, the menu highlight
returns to normal.
The program No. can be selected from a list.
Refer to "(2) Selecting a program from a list".
4)
Refer to "4.2 Editing operations".
5)
The created machining program is saved in the NC
memory.
The menu highlight returns to normal.
(Note 1) An error occurs if a nonexisting program No. is set.
(Note 2) If the selected program is running, it can be displayed but not edited. Even if data is
set, an error occurs when the
INPUT
key is pressed, and the program is not saved.
(Note 3) When changing to the Edit screen after operation search, the searched program
becomes the edit program.
(Note 4) If the operation parameter "Program save type" is set to 1, the program is saved
each time the
INPUT
key is pressed. Thus, it is not necessary to press the
File save
menu.
Press the menu key
Area change , and select the
usage area.
Press the menu key Open .
Input the program No.
112 INPUT
Edit the machining program.
Save the program.
Menu Save file Y
(Note 4)
When
Open
is pressed
again, the process ends.
Downloaded from ManualsNet.com search engine