Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Страница: 129 / 512

CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 114
3.1.2 Erasing the tool offset data
(1) Erasing one line of tool offset data at the cursor position
1)
The cursor appears at the data item of the selected
offset No.
102
103
104
105
106
107
101
Ofset No Length L wear Radius R wear
0.000
23.630
130.023
0.000
0.000
0.000
0.000
0.000
10.000
10.000
0.000
0.000
0.000
0.000
0.000
42.140
23.340
0.000
0.000
0.000
0.000
0.000
8.000
3.000
0.000
0.000
0.000
0.000
(Note)
One of the following methods can be used to designate the line.
• Using the cursor movement keys
↑
and
↓
, move the cursor to the line to be
selected.
• Press the menu key
Offset No.
, set the offset No. in the setting area, and press the
INPUT
key.
2)
The menu is highlighted.
A message confirming the erasing appears.
3)
The selected line of data (one line amount) is cleared to
zero.
Without the cursor moving, that line becomes the first
line of the display area.
102
103
104
105
106
107
108
Ofset No Length L wear Radius R wear
0.000
130.023
0.000
0.000
0.000
0.000
-12345.000
0.000
10.000
0.000
0.000
0.000
0.000
-123.000
0.000
23.340
0.000
0.000
0.000
0.000
-12345.000
0.000
3.000
0.000
0.000
0.000
0.000
-123.000
Move the cursor to the line to
be erased.
Select erase.
Menu
Line clear INPUT
Press the
Y
or
INPUT
key.
To cancel the erasing, press a
key other than
Y
or
INPUT
.
Downloaded from ManualsNet.com search engine