Mitsubishi Electric MELDAS 600M Series Скачать руководство пользователя

Страница: 431 / 512

CHAPTER 3 MAINTENANCE

7. Daily Maintenance

III

– 45

(2) Handling floppy disks

Please observe the following points to ensure long use of floppy disks.

(a) Precautions for use

1) Never touch the magnetic surface of the floppy disk. The disk may

become impossible to read if fingerprints adhere to the magnetic
surface.

2) Do not touch the disk with oil or iron filings on the hands.

Keep the floppy disk away from cigarette smoke, etc. Do not allow
any solvent to contact the magnetic surface.

4) When attaching an index label on the floppy disk, attach the label in

the correct positions so it will not peel off. Do not attach more than
one label on the floppy disk.

5) Write on the label before attaching it to the floppy disk. Use a

soft-tipped instrument such as a felt-tip pen to write on labels
already attached to the floppy disk.

6) Gently insert the floppy disk into the floppy disk unit with the correct

orientation. The floppy disk may be damaged if it is roughly inserted
or removed.

7) Before using a floppy disk brought in from outdoors where there is a

great difference in temperature or humidity, leave the disk in the
room for at least 30 minutes.

(b) Precautions for storage

1) Always store floppy disks that are not being used and backup floppy

disks in a plastic case.

2) Do not leave floppy disks in direct sunlight or near heaters.

3) Keep floppy disks away from magnets or objects having a strong

magnetic field. Magnetic rings, necklaces, etc., can also cause
damage to the floppy disk data, so avoid wearing these when
handling floppy disks.

4) Do not place heavy objects on floppy disks.

Downloaded from

ManualsNet.com

search engine

Содержание MELDAS 600M Series

































































































































































































































































































































































































































































































































Результаты поиска

Содержание MELDAS 600M Series

Отзывы:

Похожие инструкции для MELDAS 600M Series

Бренды по названию

Популярные бренды

Mitsubishi Electric MELDAS 600M Series, Инструкция по эксплуатации

Результаты поиска

Содержание MELDAS 600M Series

Отзывы:

Похожие инструкции для MELDAS 600M Series

Бренды по названию

Популярные бренды