CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 229
No.
Name
Details
Setting range (units)
LMC non-sensi
band
(low-order 8
bits)
The lost motion compensation dead zone can only be
set during feed forward control. Set in the low-order 8
bits.
When set to "0", 2µm will actually be set. Adjust
upwards in increments of 1µm.
16 0040
Current bias
(high-order 8
bits)
This is used in combination with high-order 8 bits of
SV030 and SV045.
–32768 to 32767
(Note)
The setting
range of the
low-order 8 bits
is 0 to 100 (µm)
LMC
non-sensi
band
The value set for the low-order 8 bits of the 160040 lost
motion parameter is displayed.
(Display-only)
0 to 100 (µm)
Downloaded from
Содержание MELDAS 600M Series
