background image

SigmaAldrich.com

20352498w   Rev 03/20 

1 of 9

Introduction

The mA700 Essential Power Supply is microprocessor 

controlled and designed to meet most electrophoresis 

needs. This manual describes the setup and operation 

of the power supply,  including important information 

on safety and maintenance. The mA700 Essential Power 

Supply can run horizontal & vertical electrophoresis, 

SDS-PAGE, native PAGE, two-dimensional 

electrophoresis, and electro-blotting.
The power supply offers access to 4 terminal pairs, 

enabling use with multiple electrophoresis devices 

simultaneously. The mA700 Essential Power Supply 

provides constant voltage, constant current or constant 

power. 

Features of mA400 Basic Power Supply:

•  Compact size
•  Microprocessor controller
•  Constant voltages, constant currents and constant 

power

•  Four terminal outlets
•  LCD display
•  Timer with alarm function
•  Advanced safety devices
•  Stackable
•  Wide applications for DNA, RNA, and protein 

electrophoresis

User Guide 

mA700 Essential Power Supply

 

mA700

     

Introduction  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1

Equipment Operation   .  .  .  .  .  .  .  .  .  .  .  .  . 2

Symbols Used on Device

Regulatory

Warnings

Safety Precautions

Environmental Operating Conditions

Avoiding Electrical Shock

Avoiding Damage to the Instrument

Technical Specifications  .  .  .  .  .  .  .  .  .  .  . 3

Installation Instructions   .  .  .  .  .  .  .  .  .  . 4

Operating Instructions

Control Interface

Button Functions

General Operating Instructions   .  .  .  .  . 5

Constant Mode Setup 

Constant Mode Operation

Program Mode Setup

Program Mode Operation

Replacing the Fuse

Troubleshooting and Maintenance  .  .  . 7

Product Ordering Information   .  .  .  .  .  . 9

Support .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9

Notice

Contact Information

Legal Manufacturer

Technical Assistance

Standard Warranty

Back View

Front View

Main Power Socket 

Fuse

ON/OFF Switch

Label

Fan

Summary of Contents for Millipore mA700










Reviews: