LEVIOR s.r.o.
Troubky č. p. 900
751 02 Troubky
CZ 61973939
INSTRUCTIONS
FOR BLOW GUNS
(48005, 48006, 48007)
The first use of the device within the meaning of this legal step instructions, which the user
confirms their free will, that this instruction properly studied, fully understand its meaning and
familiar with all the risks.
WARNING
Do not attempt to specify (or use) the device before you are familiar with the entire instruction
manual.
Attention should be given particular instructions relating to safety. Not complying with these
instructions may cause injury to the person or to other persons, or it may cause damage to
equipment or material being processed.
DESCRIPTION
Blowgun is designed for cleaning / blowing hard reachable places. It can be also used for routine
maintenance of machinery and mechanical equipment. The body of the gun was made of die-cast
aluminum. Set contains connection nipple fitted with an internal connecting thread ¼ ".
TECHNICAL DATA
Operating pressure 0.1 - 1 Mpa
Outer tube diameter 10.5 mm
Air consumption from 120 to 600 l / min
Inlet fitting 1/4 "
