background image

LIMITED WARRANTY

PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers.  These warranties give specific legal 

rights. Except where prohibited by local  law, the law of the State of Washington governs all warranties and all  exclusions and limitations of 

warranties and remedies. There may be other rights which vary from state to state.

PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal  use and service. A 

defective product may be returned for a free replacement  within 90 days from the date of purchase, provided that product is returned to  

place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® 

will replace at no charge  any parts which our examination shall disclose to be defective and under  warranty. These warranties shall be 

valid only when a sales receipt showing the date of purchase accompanies the defective product or defective part (s)  being returned. For 

part (s) after 90 days, please remit your request, postage prepaid to: 

PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA  98138

These warranties exclude blades, bits, punches, dies,  bulbs, fuses, hoses, and other consumables which must be replaced under normal  

use and service. These warranties shall not apply to any product or part which  is used for a purpose for which it is not designed, or which 

has been repaired  or altered in any way so as to affect adversely its 

performance or  reliability, nor shall these warranties apply to any product or part which has  been subject to misuse, neglect, accident or 

wear and tear incident to normal  use and service.

PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its 

products.

Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied 

warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability 

and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household 

use and not for  commercial or business use, PERFORMANCE TOOL® makes an implied warranty of  merchantability (and, if otherwise 

applicable, an implied warranty of fitness  for a particular purpose), but only for the particular qualities or  characteristics, and for the 

duration, expressly warranted above. 

The laws on limitation of implied warranties may differ from state to state, so the  above limitations may not apply in all cases.

PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any 

product, or to the design, use, or any  inability to use the product. The sole and exclusive remedy for a defective product or part shall be the 

repair, or replacement thereof as provided above.  The laws on limitation of remedies or on consequential, incidental or special damages 

may vary from state to state, so the above limitations may not apply in all cases.  

© Copyright 2010  WILMAR CORPORATION,  P.O. Box  88259  Tukwila, WA  98138

AIR GREASE GUN

OWNER'S MANUAL

Stock Number M582DB

FOR YOUR SAFETY,

please read these instructions carefully and retain them for future use.

Summary of Contents for M582DB







Reviews: