Quick Start User Guide for
Alientech Powergate 3 Tuning Tool
CHECK LIST:
X1 Power Gate 3 Unit
X1 Mini USB Lead
X1 Data OBD Connector
CONNECTING WITH PC:
1. Plug the mini USB lead provided with your unit into the PC and wait for your PC
to install the drivers.
2. Install the program send to you by email if you haven't received this please
contact us by email "[email protected]".
3. Once the programmed has installed please open it and it will connect with the
tool and do any relevant updates.
4. The unit will now be updated and ready to use can you can now unplug it from
the PC.
CONNECTING WITH YOUR VEHICLE:
1. Ensure OBD lead is plugged in securely to the Powergate Unit, now take it to
the vehicle.
2. Ensure the Vehicle is connected to a good battery charger if your battery isn’t
good.
3. Plug the OBD connector on the lead into the OBD port in your car (This can be
in various places depending on the vehicle) and switch on the ignition.
4. It is good practice to ensure there are no fault codes in the system before you
start the procedure in case there are any underlying issues with the vehicle. So
tap the diagnostic icon then on the correct vehicle & then the forward arrow to
continue. It will then give you instructions to follow on the screen. Make a
note of any stored codes or faults and clear the codes.
