LS ELECTRIC SV-iS7 Series, Руководство пользователя

Страница: 311 / 491

Learning Advanced Features
294
Group Code Name LCD Display Parameter Setting Setting Range Unit
hunting
91
Gain from current
hunting prevention
AHR P-Gain 1000
0
–
32767
-
This function is used to prevent the hunting of a V/F controlled fan or motor caused by current
distortion or oscillation due to mechanical resonance or other reasons. You can set the hunting
prevention function (CON-90) to prevent current hunting.
CON-91 AHR P-Gain : Increasing AHR proportional gain improves the responsiveness of the
anti-hunting regulation. However, current oscillation may result if AHR proportional gain is set
too high.
8.42 Fire Mode
This function is used to allow the inverter to ignore minor faults during emergency situations,
such as fire, and provides continuous operation to protect other systems, such as ventilation
fans. When fire mode is activated, the inverter operates continuously based on the set
frequency and direction.
Group Code Name LCD Display Parameter Setting Setting range Unit
ADV
80
Fire mode
selection
Fire Mode Sel
0 None
0 – 2
-
1 Fire Mode
-
2 Fire Test
81
Fire mode
frequency
Fire Mode Freq 60.00 Hz
82
Fire mode
operating
direction
Fire Mode Dir
0 Forward
0
–
1
-
-
1 Reverse
83
Fire mode
counter
Fire Mode Cnt 0 - -
IN
65 –
75
Px terminal
configuration
Px Define 51 - -
OUT
31 –
33
Relay1,2 and
Q1
Relay1,2 / Q1 37 - -