LS ELECTRIC SV-iS7 Series, Руководство пользователя

Страница: 192 / 491

Basic Functions
175
B
as
ic
Func
tio
ns
7.13 V/F (Voltage/Frequency) Control
Configure the inverter’s output voltages, gradient levels, and output patterns to achieve a
target output frequency with the V/F control. The amount of torque boost used during low
frequency operations can also be adjusted.
7.13.1 Linear V/F Pattern Operation
A linear V/F pattern configures the inverter to increase or decrease the output voltage at a fixed
rate for different operation frequencies based on V/F characteristics. A linear V/F pattern is
particularly useful when a constant torque load is applied.
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV
09 Control mode Control Mode 0 V/F - -
18 Base frequency Base Freq 60.00 30.00 – 400.00 Hz
19 Start frequency Start Freq 0.50 0.01 – 10.00 Hz
BAS 07 V/F pattern V/F Pattern 0 Linear - -
Linear V/F Pattern Setting Details
Code Description
DRV-18 Base Freq
Sets the base frequency. A base frequency is the inverter’s output frequency
when running at its rated voltage. Refer to the motor’s rating plate to set this
parameter value.
DRV-19 Start Freq
Sets the start frequency. A start frequency is a frequency at which the inverter
starts voltage output. The inverter does not produce an output voltage while
the frequency reference is lower than the set frequency. However, if a
deceleration stop is made while operating above the start frequency, the
output voltage will continue until the operation frequency reaches a full stop (0
Hz).