JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 104 / 260

8 Parameterization
104
Alphanumeric entry
When an alphanumeric entry is made, a value is set by entering the individual decimal positions.
1. Selection of the parameters to be set in the menu.
2. Use to call up the parameter value for editing. The decimal point currently selected is highlight-
ed.
3. Use to select the decimal point to be changed.
4. Use or to select the desired character.
5. Use to select the next decimal point.
6. If necessary, select and set additional decimal points according to steps 3 to 4.
7. Use to confirm your setting.
This concludes the procedure for changing the parameter value.
Canceling the entry
For some menu items, a value must be entered. If you do not want to change the parameter, you can
exit the menu as described below.
1. By pressing (Next) again, the cursor moves to the right. If you move the cursor after the last
position, "Cancel" is shown in the lower right of the display.
2. Use to cancel the editing step and exit the menu item.
Use to start again from the beginning.
-----Menu name----
Parameter name
V alue currently set
Next Edit
-----Parameter name----
A BC..........................
A BCDEFGHIJKLMNOPQ
Next OK
IMPORTANT (NOTE)!
The LCD display switches back to the process display 3 minutes after the last time a button was pressed.