JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 209 / 260

209
14 Annex
14 Annex
14.1 Setting parameter overview (default setting)
Possible parameterization Default setting
Sensor TAG Alphanumeric,
max. 20 characters -
Sensor Location TAG Alphanumeric,
max. 20 characters -
Q
max
Depending nominal diameter
(
 Chapter 7.6)
Q
max
DN
(  Chapter 7.6)
Q (Flowrate) Unit l/s, l/min, l/h, ml/s, ml/min, m3/s,
m3/min, m3/h, m3/d, hl/h, g/s,
g/min, g/h, kg/s, kg/min, kg/h,
kg/d, t/min, t/h, t/d l/min
Totalizer/Pulse Unit m3, l, ml, hl, g, kg, t l
Pulses per Unit - 1
Pulse Width 0.1 to 2000 ms 100 ms
Damping (1 tau) 0.02 to 60 s 1
DO1 Alarm Config Pulse F/Pulse R, Pulse F, Gener-
al Alarm, Min. Flowrate Alarm,
Max. Flowrate AlarmEmpty Pipe,
TFE, Gas Bubble
a
, Conductivi-
ty
a
, Coating
a
, Sensor Temp
a
a
Only available for JUMO flowTRANS MAG S02/H02
Pulse F/Pulse R
DO1 behavior Active, Passive Passive
DO2 Alarm Config F/R Signal, Pulse R, General
Alarm, Min. Flowrate Alarm, Max.
Flowrate Alarm, Empty Pipe,
TFE, Gas Bubble
a
, Conductivi-
ty
a
, Coating
a
, Sensor Temp
a
F/R Signal
Digital input Setup No Function, Totalizer Reset(All),
Flowrate to Zero,System Zero
Adjust, TotalizerStop(All), Dual
Range
a
, Start/Stop Batching
a
Flowrate to Zero
Current Output 4 to 20 mA 4 to 20 mA
4 to 12 to 20 mA
Iout at Alarm (according to NE43) High alarm, configurable
21 to 23 mA or
High alarm, 21.8 mA
Low alarm, configurable
3.5 to 3.6 mA
Iout at Flow > 103 % OFF
(No signaling, current output re-
mains at 20.5 mA), high alarm,
low alarm OFF
Low Flow Cut Off 0 to 10 % 1 %
Empty Pipe Detector ON/OFF OFF
TFE Detector ON/OFF OFF