JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 88 / 260

7 Startup
88
19. Use to call up the edit mode.
20. Use or to select the desired operating mode.
"Pulse Mode": in pulse mode, pulses per unit are output. The settings for this are provided in the next
menu.
"Fullscale Frequency": in frequency mode, a frequency proportional to the flow is output. The maxi-
mum frequency can be configured according to the flow measuring range.
The "Pulse Mode" operating mode is set by default.
21. Use to confirm your selection.
22. Use to call up the edit mode.
23. Use or to set the desired value.
24. Use to confirm your setting.
25. Use to call up the edit mode.
26. Use or to set the desired pulse width.
27. Use to confirm your setting.
28. Use to call up the edit mode.
29. Use or to set the desired damping.
30. Use to confirm your setting.
Easy Setup
Pulses per U nit
10.000 / m³
Next Edit
Easy Setup
Pulse Width
30.00 ms
Next Edit
Easy Setup
Damping
30.00 ms
Next Edit
Easy Setup
Iout at Alarm
High Alarm
Next Edit