JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 10 / 260

1 Safety
10
1.3 Intended use
This device serves the following purposes:
•
To transfer liquid, pulpy or pasty measurement media with electrical conductivity
• To measure the flow of the operating volume or measurement units (with constant pressure/tempera-
ture) if a physical measuring unit has been selected
Intended use also includes the following points:
•
Observing and following the instructions provided in this manual
• Technical limit values must be observed,  see chapter 1.12 "Technical limit values", page 19
• approved measurement media must be observed,  see chapter 1.13 "Admissible measurement
media", page 19
1.4 Improper use
The device may not be used for the following:
•
Operation as an elastic compensating piece in pipelines, e.g. for compensating pipe offsets, pipe vi-
brations, pipe expansions,
• Use as a climbing aid, e.g. for mounting purposes
• Use as a holder for external loads, e.g. as a holder for pipelines
• Applying materials, e.g. by painting over the nameplate or welding or soldering parts
• Removing materials, e.g. by drilling the housing
1.5 Target groups and qualifications
The product may only be installed, started up and maintained by adequately trained qualified personnel
who have been authorized by the system operator. The qualified personnel must have read and under-
stood the manual and follow the instructions.
Before using corrosive and abrasive measurement media, the operator must check the degree of resis-
tance of all parts coming into contact with the media. The manufacturer is happy to provide support in
selecting the media, but cannot accept any liability.
The operator must observe the national regulations, which apply in the country where the product is
used, with regard to the installation, functional inspections, repairs and maintenance of electrical prod-
ucts.
1.6 Warranty conditions
IMPORTANT (NOTE)!
Improper use, failure to observe this manual, the use of underqualified personnel, or unauthorized mod-
ifications releases the manufacturer from liability for any resulting damage. In these cases, the manufac-
turer's warranty no longer applies.