JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 120 / 260

8 Parameterization
120
Italics = Parameter can only be viewed in the "Advanced" password level
Menu/parameter Value range Description
Device Setup/ ... Transmitter
... Unit Selection of "Unit" submenu
Damping 0.02 to 60 s Damping setting
The value set here refers to 1 t (tau).
The specification refers to the response time for a
sudden change in the flow. It affects the current value
in the LCD display and the current output.
Default setting: 1 second
Density 0.01 to 5.0 g/cm
3
If the flow is counted and displayed with the units g/s,
g/min, g/h, kg/s, kg/min, kg/h, kg/d, t/min, t/h, t/d, lkb/
s, lb/min, lb/h und lb/d, a fixed density must be includ-
ed in the calculations.
To convert the mass flow, the density can be config-
ured in the range between 0.01 and 5.0 g/cm
3
.
... Low Flow Cut Off Selection of "Low Flow Cut Off" submenu
TX Location TAG Alphanumeric,
max. 20 characters Entry of the measuring point tag for the transmitter
TX TAG Alphanumeric,
max. 20 characters Entry of the TAG number for the transmitter
... Operating Mode Selection of "Operating Mode" submenu
... System Zero Selection of the "System Zero" submenu
Noise Reduction Off Activate the noise reduction for a turbulent flow signal
When the noise reduction is switched on, the re-
sponse time increases.
Default setting: Off
Mean Filter
Notch Filter
Lowpass V = Auto
Lowpass V = 1