JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 126 / 260

8 Parameterization
126
Italics = Parameter can only be viewed in the "Advanced" password level
Function DO1/DO2
The function for the binary outputs is defined in the "... Logic Setup" menu.
DO1 Drive
This parameter does not have a function for devices for transmitters in a single-compartment housing
and for devices for operating in zone 1.
Devices with a transmitter in the single-compartment housing are configured via the jumpers on the
transmitter backplane (see chapter 7 "Startup", page 73).
Menu/parameter Value range Description
Input/Output/ ... Digital Out Mode
Function DO1/DO2 Pulse F/Pulse R Selection of functions for the digital outputs DO1 and
DO2
Pulse F/Pulse R:
•
DO1 = Pulse output for the forward direction
• DO2 = Pulse output for the reverse direction
Pulse F/Logic:
•
DO1 = Pulse output for the forward direction
• DO2 = Binary output
Pulse FR/Logic:
•
DO1 = Pulse output for the forward and reverse
direction
• DO2 = Binary output
Logic/Logic:
•
DO1 = Binary output
• DO2 = Binary output
Default setting: Pulse FR/Logic
Pulse F/Logic
Pulse FR/Logic
Logic/Logic
DO1 Drive Passive, Active The digital output DO1 can be configured as an active
or passive output.
Refer to the order confirmation for the current config-
uration.
Default setting: Passive
?
?