JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 192 / 260

13 Technical data
192
13.3 Sensor JUMO flowTRANS MAG H01/02
13.3.1 Temperatures
The temperature range of the device depends on a series of factors. These factors include the measure-
ment medium temperature, the ambient temperature, the operating pressure, the lining material, and the
approvals for the Ex-protection.
13.3.2 Storage temperature
-40 to +70 °C (-40 to +158 °F)
13.3.3 Minimum admissible pressure depending on the medium temperature
13.3.4 Maximum admissible cleaning temperature
If the ambient temperature is > 25 °C, the difference must be subtracted from the max. cleaning tem-
perature. T
max
- ∆ °C.
(∆ °C = T
Amb
- 25 °C)
13.3.5 Maximum admissible temperature shock
Lining Nominal width p
Operation
abs for T
Operation
a
a
Higher temperatures are allowed for CIP/SIP cleaning for a limited time (  See table 13.3.4).
PFA DN 3 to 100 (1/10 to 4") 0 mbar < 180 °C (356 °F)
PEEK DN 1 to 2 (1/25 to 1/12″) 0 mbar < 120 °C (248 °F)
CIP cleaning Lining T
max
T
max
minutes T
amb
Sensor
Steam cleaning PFA 150 °C (302 °F) 60 25 °C (77 °F)
Liquids PFA 140 °C (284 °F) 60 25 °C (77 °F)
Lining Temp. shock max. temp. diff °C Temp. gradient °C/min
PFA Any Any
PEEK Any Any