JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 149 / 260

149
8 Parameterization
8.6 Filling operation - JUMO flowTRANS MAG S02/H02
The integrated filling function (batch) on the models JUMO flowTRANS MAG S02/H02 lets you control
filling actions with a filling time > 3 seconds.
To allow this to happen, the filling quantity is defined using a configurable counter.
The filling action is started via the digital input (DI) or the fieldbus.
One of the digital outputs (DO) is used to actuate the valve, which is closed again on reaching the defined
filling quantity.
The transmitter measures the after-run quantity (rt) and computes the after-run quantity correction from
it.
Low-flow cut off can be additionally enabled if needed.
(1) Receiver container O Valve opened (filling started)
(2) Start/stop contact (digital input) C Valve closed (fill quantity reached)
(3) Sensor dt Valve closing time
(4) Servo-valve rt After-run time
(5) Container to be filled
DI Digital input
DO Digital output