JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 145 / 260

145
8 Parameterization
8.4.9 Menu: Totalizer
Italics = Parameter can only be viewed in the "Advanced" password level
Italics = Parameter can only be viewed in the "Advanced" password level
Damping
To achieve a fast response time of the filling function, damping must be switched off. The filling time
should be > 3 seconds.
Menu/parameter Value range Description
Totalizer
... Reset Vol. Totals
Selection of "... Reset Vol. Totals" submenu
... Batching
a
Selection of "... Batching" submenu
... Edit Vol. Totals Selection of "... Edit Vol. Totals"
a
Only available for JUMO flowTRANS MAG S02/H02
Menu/parameter Value range Description
Totalizer/ ... Reset Vol. Totals
Edit Totalizer Fwd Reset the forward totalizer to zero
Edit Totalizer Rev Reset the reverse totalizer to zero
Edit Totalizer Net Reset the difference totalizer to zero
All Vol. Totalizer Reset all totalizers to zero
Menu/parameter Value range Description
Totalizer/ ...Batching
a
Damping ON/OFF Switch damping on/off
Default setting: ON
Preset Batch Tot. - Sets the filling quantity.
The configured digital output is activated when the
defined filling quantity is reached.
Lag Corr, Mode Automatic/Manual Selects the after flow quantity correction.
It takes a certain time to close the filling valve; this in
turn leads to an after-flow of the fluid although the fill-
ing quantity has been reached and the valve closer
contact is actuated.
"Automatic after-flow correction" corrects the defined
filling quantity by the after-flow quantity.
Lag Corr. Quantity -100,000 to +100,000 Manual input of the after-flow quantity
a
Only available for JUMO flowTRANS MAG S02/H02
?