JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 113 / 260

113
8 Parameterization
8.4 Parameter description
8.4.1 Menu: Easy Setup
Menu/parameter Value range Description
Easy Setup Menu "Easy Setup"
Language Deutsch, English, Français,
Español, Italiano, Dansk,
Svenska, Polski, Russki,
Zhongweng, Turkce Menu language selection
Q (Flowrate) Unit l/s; l/min; l/h; ml/s; ml/min;
m3/s; m3/min; m3/h; m3/d;
Ml/d; ft3/s; ft3/min; ft3/h; ft3/d;
ugal/s; ugal/min; ugal/h;
ugal/d; Mugal/d; igal/s;
igal/min; igal/h; igal/d; bls/s;
bls/min; bls/h; bls/d; hl/h; g/s;
g/min; g/h; kg/s; kg/min; kg/h;
kg/d; t/min; t/h; t/d; lb/s;
lb/min; lb/h; lb/d;
custom/s Unit selection for the flow display
Default setting: l/min
Q
max
Min. measuring range:
0 to 0.2 m/s
(0 to 0.02 × Q
max
DN)
Measuring range selection for supply and return side
Default setting: 1 × Q
max
DN
Max. measuring range:
0 to 20 m/s
(0 to 2 × Q
max
DN)
Totalizer/Pulse Unit m3; l; ml; ft3; hl; g; kg; t; lb; ig-
al; ugal; bls; Ml; Mugal;
custom Unit selection for the flow counter
Default setting: l
Operation Pulse mode, Fullscale Fre-
quency Operating mode selection for the digital output
You can choose between two operating modes:
•
"Pulse Mode": In pulse mode, pulses per unit are
output (e.g. 1 pulse per m
3
).
• "Fullscale Frequency": in frequency mode, a fre-
quency proportional to the flow is output. The
maximum frequency can be configured according
to the measuring range end value (maximum
5.25 kHz).
Default setting: "Pulse Mode"
Pulses per unit - Display of pulse per unit output by the digital output
The maximum possible number of pulses is 5250/
second.
Fullscale Frequency 0 to 5250 Hz Frequency setting for the measuring range end value
in "Fullscale Frequency"
Pulse Width 0.1 to 2000 ms Pulse width selection for the digital output
The pulse factor and pulse width are interdependent
and are calculated dynamically.