JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 193 / 260

193
13 Technical data
13.3.6 Maximum ambient temperature depending on the medium temperature
13.3.7 Protection type according to EN 60529
13.3.8 Pipe vibration according to EN 60068-2-6
Valid for:
13.3.9 Insertion length
The flanged devices comply with the insertion lengths specified according to VDI/VDE 2641, ISO 13359
or according to DVGW (work sheet W420, design WP, ISO 4064 short).
IMPORTANT (NOTE)!
There is the additional document "JUMO flowTRANS MAG S/H - Safety Manual Ex for devices 406012 -
406019" for the measuring systems that are used in potentially explosive areas.
The information and data contained in the document must also be strictly observed.
Compact and remote mount design (standard temperature version)
Process connection
Ambient temperature Medium temperature
Minimum
a
a
The following applies for low temperature version (optional): -40 °C (-40 °F).
Maximum Minimum Maximum
b
b
Higher temperatures are allowed for CIP/SIP cleaning for a limited time (  See table
chapter 13.3.4 "Maximum admissible cleaning temperature", page 192).
Flange,
Variable process connections
-20 °C (-4 °F)
60 °C (140 °F)
-25 °C (-13 °F)
100 °C (212 °F)
40 °C (104 °F) 130 °C (266 °F)
Remote mount design (high-temperature version)
Process connection
Ambient temperature Medium temperature
Minimum
a
a
The following applies for low temperature version (optional): -40 °C (-40 °F).
Maximum Minimum Maximum
Flange -20 °C (-4 °F) 60 °C (140 °F) -25 °C (-13 °F) 180 °C (356 °F)
Compact design (internal transmitter) IP65, IP67 (NEMA X4)
Remote mount design (external transmitter) IP65, IP67 (NEMA X4), IP68
Compact design
(With aluminum transmitter housing)
In the range 10 to 58 Hz
max. 0.15 mm (0.006") deflection
In the range 58 to 150 Hz
max. 2 g acceleration
Remote mount design
(Sensor)
In the range 10 to 58 Hz
max. 0.15 mm (0.006") deflection
In the range 58 to 150 Hz
max. 2 g acceleration