JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 91 / 260

91
7 Startup
with the PROFIBUS-PA version
Q (Flowrate) Unit l/s; l/min; l/h; ml/s; ml/min; m3/s;
m3/min; m3/h; m3/d; hl/h; g/s;
g/min; g/h; kg/s; kg/min; kg/h;
kg/d; t/min; t/h; t/d l/min
Totalizer/Pulse Unit m3; l; ml; hl; g; kg; t l
Pulses per unit 1
Pulse width 0.1 to 2000 ms 100 ms
Damping (1 tau) 0.02 to 60 s 1
DO1 Alarm Config Pulse F/Pulse R, Pulse F, Gener-
al Alarm, Min. Flowrate Alarm,
Max. Flowrate Alarm, Empty
Pipe, TFE
Advanced functions
a
:
Gas Bubble, Conductivity, Coat-
ing, Sensor Temp
Pulse F/Pulse R
DO1 Action Active/Passive Passive
DO2 Alarm Config F/R Signal, Pulse R, General
Alarm, Min. Flowrate Alarm, Max.
Flowrate Alarm, Empty Pipe,
TFE
Advanced functions
a
:
Gas Bubble, Conductivity, Coat-
ing, Sensor Temp
F/R Signal
Digital Input Setup No Function, Totalizer Reset(All),
Flowrate to Zero,System Zero
Adjust, TotalizerStop(All),
Advanced functions
a
:
Dual Range, Start/Stop Batching
Flowrate to Zero
Current Output 4 to 20 mA,
4 to 12 to 20 mA 4 to 20 mA
Iout at Alarm High alarm, configurable
21 to 23 mA or High alarm, 21.8 mA
Low alarm, configurable
3.5 to 3.6 mA
Iout at Flow > 103 % OFF
(No signaling, current output re-
mains at 20.5 mA), high alarm,
low alarm OFF
Low Flow Cut Off 0 to 10 % 1 %
Empty Pipe Detector ON/OFF OFF
TFE Detector ON/OFF OFF
a
Only available for JUMO flowTRANS MAG S02/H02
Possible parameterization Default setting
PA Addr (-BUS-) 0 to 126 126
Ident Nr. Selector 0x9700, 0x9740, 0x3430 0x3430
Possible parameterization Default setting