JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 103 / 260

103
8 Parameterization
8.2.5 Selecting and changing parameters
Table entry
When an entry is made from a table, a value is selected from a list of parameter values.
1. Selection of the parameters to be set in the menu.
2. Use to call up the list of the available parameter values. The parameter value that is currently
set is highlighted.
3. Use or to select the desired value.
4. Use to confirm your selection.
This concludes the procedure for selecting a parameter value.
Numeric entry
When a numeric entry is made, a value is set by entering the individual decimal positions.
1. Selection of the parameters to be set in the menu.
2. Use to call up the parameter for editing. The decimal point currently selected is highlighted.
3. Use to select the decimal point to be changed.
4. Use or to select the desired value.
5. Use to select the next decimal point.
6. If necessary, select and set additional decimal points according to steps 3 to 4.
7. Use to confirm your setting.
This concludes the procedure for changing the parameter value.
Menu name
Parameter name
V alue currently set
Next Edit
Parameter name
Parameter 1
Parameter 2
Parameter 3
Cancel OK
----Menu name----
Parameter name
1 2 . 3 4 5 6 [ unit ]
Next Edit
-----Parameter name----
1 2 . 3 4 5 6 [ unit ]
Next OK