JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 132 / 260

8 Parameterization
132
Italics = Parameter can only be viewed in the "Advanced" password level
Menu/parameter Value range Description
Communication/Cyclic Data Out/ Cyclic Upd. Select
Flow Group ON/OFF Selection of the data to be output via the infrared ser-
vice port
The diagnostics data is consolidated into groups.
Each group can be separately switched on or off and
thus added to the diagnostics data record to be out-
put.
Contents: Q (%), Q (l/s), v (m/
s)
Output Group ON/OFF
Contents: 20 mA output
[lo (mA)], frequency at
digital output DO1 [f1 (Hz)],
frequency at digital output
DO2 [f2 (Hz)]
Status Group ON/OFF
Contents: Alarm, Empty Pipe
Frequency [(EPD (Hz)],
TFE Frequency [TFE (Hz)]
Coil Group ON/OFF
Contents: Coil Current [lc
(mA)],
Coil Voltage [CV (V)],
Total Coil Resistance [CR
(Ohm)]
TX Group Contents: Reference Voltage
Digits [Ref], Differential Sig-
nal at ADC [SP], Signal Max
[SM], Signal Min [Sm],
Signal Error from NR Filter
[SE], Signal DC Errors [SDE],
Internal Amplification [Api],
Signal Noise Ratio [SNR]
Vol. Totals Group ON/OFF
Contents: Forward Totalizer
[Fwd (m3)], Reverse Totalizer
[Rev (m3)], Differential Total-
izer [Net (m3)]
Electrodes Group ON/OFF
Contents: Electrode Imped-
ance E1 to Ground
[IE1 (kOhm)], Electrode Im-
pedance E2 to Ground
[IE2 (kOhm)], Deposit Values
electrode 1 [QE1] and aE1,
Electrode Values Electrode 2
[QE2] and aE2, Gas Bubble
Value [Gasb], Conductivity
[conduS], Sensor Tempera-
ture [sensorT°C]