JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 127 / 260

127
8 Parameterization
Italics = Parameter can only be viewed in the "Advanced" password level
Menu/parameter Value range Description
Input/Output/ ... Logic Setup
DO1 Signal No Function, F/R Signal,
Alarm Signal
Dual Range
a
, Batch End
Contact
a
The menu is only displayed if the "Logic/Logic" func-
tion has been selected in the "DO1/DO2 Function"
menu.
This menu is not displayed in the default setting.
•
F/R Signal: the digital output signals the flow di-
rection
• Alarm Signal: the digital output functions as an
alarm output; the alarm type is set in the "DO1
Alarm Config" menu
• Dual Range
a
: The digital output is activated when
measuring range 2 (Qmax2) is selected.
• Batch End Contact
a
: The digital output is activat-
ed when the configured filling quantity is reached.
Default setting: F/R Signal
... DO1 Alarm Config Selection of "... DO1 Alarm Config" submenu
The menu is only displayed if the "Alarm Signal" func-
tion has been set in the "DO1 Signal" parameter.
DO1 Action Normally Open, Normally
Closed Selection of the switching behavior for the digital out-
put
Default setting: Normally Open
DO2 Signal No Function, F/R Signal,
Alarm Signal
Dual Range
a
, Batch End
Contact
a
See "DO1 Signal" in this table
... DO2 Alarm Config Selection of "... DO2 Alarm Config" submenu
The menu is only displayed if the "Alarm Signal" func-
tion has been set in the "DO2 Signal" parameter.
DO2 Action Normally Open, Normally
Closed Selection of the switching behavior for the digital out-
put
Default setting: Normally Open
a
Only available for JUMO flowTRANS MAG S02/H02