JUMO flowTRANS MAG H01, Руководство по эксплуатации

Страница: 101 / 260

101
8 Parameterization
8.2.3 Switching to the Configuration level (Parameterization)
The device parameters can be displayed and changed at the Configuration level.
1. Use to switch to the Configuration level.
2. Use or to select the Access Level.
3. Use to confirm your selection.
After logging into the corresponding access levels, the password can be changed or reset. A password
is reset (status "no password defined") by selecting as the password.
1. Enter the corresponding password (  see chapter 8.2.5 "Selecting and changing parameters",
page 103). No password has a default setting; you can switch into the configuration level without en-
tering a password.
The selected access level remains enabled for 3 minutes. You can quickly switch between the pro-
cess display and the configuration level without entering the password again.
2. Use to confirm the password.
The first menu item of the configuration level can now be displayed in the LCD display.
3. Use or to select a menu.
4. Use to confirm your selection.
Process display
Access Level
Read Only
Standard
Advanced
Next OK
IMPORTANT (NOTE)!
There are four access levels.
Passwords can be defined for the "
Standard " and " Advanced " levels. No passwords have a default set-
ting.
All entries in the "
Read only " level are blocked. The parameters can be read but not changed.
In the " Standard " level, all parameters described in chapter 8.4 "Parameter description", page 113, ex-
cept the ones displayed in in italics, can be changed.
In the " Advanced " level, all parameters can be changed.
Only customer service can access the " Service " menu.
Enter Password
********
QRST UV WXYZ 01 2 3456
Next OK