Atmos ACD 03 Скачать руководство пользователя

Страница: 198 / 292

Operation manual - EN

www.atmos.eu

EN - 198

ACD03/04

• P29

System

parameter- Controller factory setting (reset)

After confirmation, the factory setting will be returned, including the start of the Installation guide

(WIZARD) for the basic definition of the boiler and the hydraulic diagram number.

• P30

System

parameter - Back up / System Recovery

The parameter is intended to back up or restore the last saved ACD 03/04 controller settings from

a backup.

Data is saved or backed up on the SD card inserted in the ACD 03/04 controller. To replace or

insert the card, it is necessary to remove the controller from the boiler panel (ATMOS SWS 18

wall box).

CAUTION

Recommendation

- after completing the installation, the service technician

will

back up

the current settings to a SD card!

INFO

- If the Back up is not created manually, it is

created automatically

after 7 days.

If it is not possible to create an automatic backup (SD card is not inserted, there is no space

on the SD card, the SD card is damaged, etc.), an alarm will be displayed:

Backup not created! – SD card not inserted!

Backup not created! – SD card error!

Backup not created! – Program error (XX)!

Alarm is displayed in menu

Information

(yellow notice). Alarm is possible to delete by "cross" .

Alarm can be found in the alarms history (

→

In case of alarm display with error number, detailed information can be found in the information

table.

INFO

- By recovering the settings, recall (upload) of the last saved version (BACKUP) on

the SD card will be performed.

10. Setting menu - System

Содержание ACD 03





































































































































































































































































































Результаты поиска

Содержание ACD 03

Отзывы:

Похожие инструкции для ACD 03

Бренды по названию

Популярные бренды

Atmos ACD 03, Руководство по эксплуатации

Результаты поиска

Содержание ACD 03

Отзывы:

Похожие инструкции для ACD 03

Бренды по названию

Популярные бренды