Atmos ACD 03, Руководство по эксплуатации

Страница: 283 / 292

Operation manual - EN
www.atmos.eu
EN - 283
ACD03/04
On the ACD 03/04 controller ( → Hydraulics / Communication / Room units), activate connec-
ted room units by setting them to Yes .
On the ACD 03/04 controller, go back one step in the menu by clicking on the symbol and click
on (select) the activated unit, for example ARUa (b, c, d, e).
Click on the
Pairing button (time limit to pair is 300 s (5 minutes)).
The pairing of the ACD 03/04 controller with the ARU30 room unit is confirmed by terminating
the time countdown (before it expires).
With this pairing method, it is forbidden to invoke the pairing process on more than one unit.
INFO - Finally, we check the correct pairing. If the unit is not properly paired with the
ACD03/04 controller, the current values are missing in the
i i
Information menu.
When communication is lost, the last status is displayed.
ATTENTION - Each device (ARU10, ARU30, other devices) is slightly different, so it
requires a different pairing procedure!
INFO - The pairing process can be interrupted on the ACD 03/04 controller ( →
Hydraulics/ Communication) by clicking on the Pairing button again (the time countdown
disappears).
ATTENTION - If the current room temperature for individual circuits is not displayed
on the ARU30 room unit, no room units (their temperature sensors) for the heating circuit
are assigned, assign them in the submenu → Hydraulics / Function configuration /
Heating circuit functions / RS(E)x - room sensors - RSa (b, c) a RSEa (b, c, d, e) .
RSa (b, c)
button - for
ARU5
room unit (sensor)
RSEa (b, c, d, e)
button - for
ARU10 and ARU30
room units (external room temperature
sensor).
13. R
oom units