Atmos ACD 03, Руководство по эксплуатации

Страница: 281 / 292

Operation manual - EN
www.atmos.eu
EN - 281
ACD03/04
• Pairing
The function is used to pair ARU30 room units (devices) with ACD 03/04 controller.
Proceed as follows: first, on the ACD03/04 controller under the button (to enter the menu), click
on the Hydraulics symbol. Then go to the Communication button and click on it, then go to
pairing:
Under the Communication button click on the Room units button. Select the room unit you want to
switch on and activate it to Yes ( → Hydraulics / Communication / Room units).
The controller allows to define up to 5 room units (ARUa, ARUb, ARUc, ARUd and ARUe), by
default one for each circuit (Circuit 1, 2, 3 and 4 and DHW)
INFO - Predefined default setting: for circuit 1 - ARUa unit and RSEa sensor, for circuit
2 - ARUb unit and RSEb sensor , for circuit 3 - ARUc unit and RSEc sensor,...
The basic concep t counts on the setting of one room unit for one heating circuit. Therefore, for MK
and DK circuits after switching on the room unit (Yes), a predefined heating circuit is automatically
assigned to the given room unit (Circuit 1 is assigned to ARUa, Circuit 2 is assigned to ARUb, Circuit
3 is assigned to ARUc, etc.).
At the same time, the RSE room temperature sensor of the respective unit is automatically assigned
to the circuit. All provided that no other sensor and unit have been already assigned.
The controller also allows you to set the Room unit for more heating circuits or more room units
for one heating circuit concept in the next steps.
INFO - If more sensors (from more room units for one heating circuit) are selected, the
controller shall work with their average value (T
RSEa
+ T
RSEb
/ 2).
Pairing from the ACD 03/04 controller by entering the address
On the ACD 03/04 controller, under the Communication button click on the Room units button (
→ Hydraulics / Communication / Room units). Select the room unit you want to be switched on
and activate it by setting it to
Yes
.
Go back one step in the menu by clicking on the symbol and click on (select) the activated unit,
for example ARUa (b, c, d, e), we want to pair.
Click on the
Device button and select the relevant type of ARU30 room unit (device) that is to be
paired.
13. R
oom units