Atmos ACD 03, Руководство по эксплуатации

Страница: 195 / 292

Operation manual - EN
www.atmos.eu
EN - 195
ACD03/04
• P15
System
parameter - Password for user (child protection function)
The parameter allows the customer to lock the controller against accidental change of any
parameter (child protection function).
When the controller is locked by the user, the controller can be used only to obtain the necessary
i
Information.
Enter the numeric code in Parameter P15
System
to set the required user password.
The password is activated after the time specified by → P11
System
parameter (after starting the
screensaver) or immediately after switching off and on the main boiler (ACD 03/04 controller)
switch.
Any change to the settings will require the password.
INFO - If the password is forgotten, only the service technician can change or disable the
password (child protection function).
By setting P15
System
parameter to 0 (00, 000, 0000 = 0) the user password (child protection
function) is inactive.
• P16
System
parameter - Password for technician
The parameter is used by the manufacturer to set a special (non-standard) access password for the
technician.
INFO - The parameter can be changed and is visible only after logging in at the OEM and
manufacturer level.
• P17
System
parameter - Password for OEM
The parameter is used by the manufacturer to set a special (non-standard) access password for
special customers.
INFO - The parameter can be changed and is visible only after logging in at the manufacturer
level.
• P18
System
parameter - Proposed room temperature
The proposed room temperature is a parameter needed as a basis for the correct design (calculation)
of the heating system, to maintain the required temperature of the heating circuits.
The value must be based on the heating system design project.
Factory default setting: 20 °C
10. Setting menu - System