Atmos ACD 03, Руководство по эксплуатации

Страница: 63 / 292

Operation manual - EN
www.atmos.eu
EN - 63
ACD03/04
Time programs for Auto mode
(Access level - User)
The setting is performed with the button (to enter the menu), then click on the
0 24
symbol for Time
programs.
The time programs are used in the
Auto working mode, where according to the timeline of the
relevant
day
, it is switched between
Comfort
(day) and
Setback
(Economic) (night) required
temperature in the reference room.
The time programs are defined by setting the time of
start and end (stop) of the comfort
block of the relevant heating circuit on a relevant day of the weekly program of the relevant heating
circuit.
Within one day (24 hours), it is possible to set 5 blocks of comfort demand, i.e. within one
day it is
possible to set 5 pairs (start + end) of times. The beginning of the first time block must be equal to
or greater than 00:00, the beginning of the second and third time blocks must be equal to or greater
than the end of the previous block. The end of the last time block must be set to 23:59 (24:00)
maximum.
In each block, it is possible (according to → P07
System
Parameter setting) to set the
required room day temperature.
The gap between the blocks means heating at Setback (Economic) temperature.
INFO - If we set the dependence of a circuit (multiple circuits) on another circuit, we set the
time programs only for the Control circuit.
The dependent heating circuit(s) take(s) over all requirements and modes from the Control circuit (
→ Hydraulics / Function Configuration / Circuit Connection Type = Dependent).
Control circuit connection setting:
10. Setting menu - T
ime programs