Atmos ACD 03, Руководство по эксплуатации

Страница: 251 / 292

Operation manual - EN
www.atmos.eu
EN - 251
ACD03/04
Sweeper
(Access level - User - nothing / Service technician - all)
The setting is performed with the button (to enter the menu), under which click on the Sweeper
symbol.
Sweeper menu (function) is intended for service technicians and sweepers. The function is activated
when adjusting the boiler and performing authorized measurement of combustion quality.
After its switched on, the boiler does not switch off when the required temperature is reached, but
the boiler always works up to the maximum operating temperatures. Excess energy is transferred into
accumulation tanks, DHW tank and heating system regardless of the requirements of the object.
The Sweeper function can always activate only one of the selected sources:
Boiler - manual (FAN, PRESS) (manual stoking)
Burner - automatic (BRE)
External boiler (EK1, EK2, EK3)
For DCxxSP(X) and DCxxGSP combined boilers and boilers with modification for pellet burner
(manual/automatic operation) controller must be switched to the required fuel (source) before starting
the Sweeper function by holding the symbols
/
for 3 seconds.
Turn on the Sweeper function we carry out by pressing the " Start " button. The function starts
automatically for 60:00 minutes. To extend the time of the Sweeper function press the "Time +15:00"
button. Each press of the "Time +15:00" button increases the on time of the function by 15 minutes, but
for a maximum of 60 minutes.
During the measurement the type of source, its temperature (xx °C) and the time countdown until the
automatic termination of the Sweeper function are displayed.
10. Setting menu - Sweeper