Custom Equipment, Unique Electronic Products
Phone (303) 651-3794
Blue Point Engineering
www.BPEsolutions.com
DMX Data Analyzer Board
Blue Point
Engineering
Instruction
I
Pointing the Way to Solutions!
SPECIFICATIONS:
POWER INPUT: +5VDC regulated, 5.5 x 2.1 x 9.5 connector - center positive. If a regulator option is
ins7VDC ~ +15VDC
FUSE: .7 ~ 1 Amp Fast Acting 5 X 20 mm
POWER USE: Approx: 42mA back light=0, 73mA back light=5, 62mA back light=0 & B circuit installed,
140mA back light=25, 160mA back light=25 & B circuit installed. (Auto Dim option available)
DATA TYPE: DMX512 (250Khz)
DATA INPUT:
DMX512 - 5 (or 3) pin male XLR,
Pin 1 - (Shield) Not connected, Pin 2 Data - , Pin 3 Data +
DATA OUTPUT:
DMX512 outputs - 5 (or 3) pin female XLR's,
Pin 1 - Power supply common, Pin 2 Data -, Pin 3 Data +
DIMENSIONS Approx:
PCB’s: CPU and LCD boards: 3.6” W x 1.75” L x 1.63” H
(including standoffs)
CPU and LCD boards with Button board attached: 5.04” W
Button board: 1.7” W x 1.13” L x .95” H
FEATURES INCLUDE:
Bar Graph Display (Displays 24 Channels at a Time)
Decimal Display, Hexadecimal Display, Percentage Display, Bar Graph Display, and Statistics Display
Auto Dim (User Set Timer)
Dual Input Option
Fully assembled printed circuit board. The PCB assembly consists of 3 boards, the 16 x 2 back lit
display, detachable 4 button and contrast board, and the control board. The PCB includes a clear LCD
cover that mounts with adhesive strips on your custom enclosure. +5VDC input or with the onboard
+5V regulator, the Analyzer has a +7V ~ +15VDC input voltage range.
Design your own enclosure with an analyzer / tester
display or add to your existing equipment or system.
The DMX Analyzer is a 16 x 2 DMX512 / DMX LCD
back lit data analyzer display unit. The DMX Analyze
displays any 4 of 512 channels at a time, and showing
the numeric levels currently on those channels in
The 4 on-board buttons [ +, - , 10, 100 ] will scroll thru the DMX channels for viewing, by holding
down the ' - ' button and pressing 10 or 100 will subtract by 10 or 100. The Stats display shows the
packet size, start code, and rate or (frequency). Board also features a dual input selection in
programming, if your installation needs a front and rear connection, the user can easily change from the
'A' to 'B' input simply by making a front selection change. The LCD's backlight is easily adjusted with
front access software setting for easy changes in those dark control room environments. The auto dim
feature allows the user to set the time and dim to value. This is useful if your using battery power.
DMX Analyzer - Tester PC Board
Back Side View
Front Side View
Side View
Mount XLR connector as desired.
Recommended wire: 24 AWG
stranded & twisted together.
Analyzer Board
DMX
Wire
Analyzer Board
FRONT
BACK
several display formats. Decimal, Hexadecimal, Percentage, or Bar Graph
Overview