manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 88 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 88

•

Press ENT to reset Energy Metering

•

Press ENT to perform Master Reset

3.8.7 

Resetting individual demand history or energy metering values

from the HMI

The presence of the "E" on the top line of the display indicates that the value can be reset
from this menu item. The steps necessary to reset individual Demand History or Energy
Metering items are as follows:

1.

Navigate to the desired Demand History or Energy Metering parameter screen, then
press the ENT pushbutton.

2.

Press the ENT pushbutton. The control will reset the displayed value.
The screen will return to the parameter screen and display the new value.

3.8.8 

Resetting all demand history or energy metering parameter

values from the HMI

All Demand History or Energy Metering parameter menu items that include an "E" on the
top line of the display can be reset from this menu item. The steps necessary to reset ALL
Demand History or Energy Metering parameter values are as follows:

1.

Navigate to the "Reset Demand History" or "Reset Energy Metering" screen.

2.

Press the ENT pushbutton. The control will display a "confirmation" screen similar
to the following.

Press Ent to confirm reset Demand History (or Energy
Metering)

3.

Press the ENT pushbutton. The control will reset ALL the Demand History or
Energy Metering values.

Demand History (or Energy Metering) has been reset.

4.

Press the Exit pushbutton to return to the "Demand History" or "Energy Metering"
menu.

3.8.9 

MASTER RESET of all demand history and energy metering

parameter values from the HMI

The "Demand History" menu includes the capability to initiate a Master Reset of both the
Demand History and Energy Metering parameter values. This capability is also included
in the "Energy Metering" menu. The steps necessary to reset ALL Demand History and
Energy Metering parameter values are as follows:

Section 3

1VAC388793-MB A

Operation

82

TCC300

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов